Uwe fiberglass Maka ụgbọ mmiri
Uwe fiberglass Maka ụgbọ mmiri
1.Product iwebata: red silicone roba fiberglass ákwà na-mere nke fiberglass isi ákwà na elu àgwà pụrụ iche silicone mkpuchi. Ọ na-enye nkwụsi ike abrasion ka ukwuu, nkwụsi ike ọkụ, nkwụsị mmiri, nkwụsị UV na ihe ndị ọzọ. Ihe kachasị mkpa bụ na ọ bụ ihe na-adịghị egbu egbu.
2.Technical Parameters
| Nkọwapụta | 0.5 | 0.8 | 1.0 |
| Ọkpụrụkpụ | 0.5 ± 0.01mm | 0.8 ± 0.01mm | 1.0 ± 0.01mm |
| ibu/m² | 500g± 10g | 800g± 10g | 1000g± 10g |
| Obosara | 1m,1.2m,1.5m | 1m,1.2m,1.5m | 1m,1.2m,1.5m |
3. Akụkụ:
1) Na-arụ ọrụ okpomọkụ: -70 ℃ - 280 ℃, Ezi thermal mkpuchi ihe onwunwe
2) Ezigbo iguzogide ozone, oxygen, ìhè na ịka nká, ọmarịcha ihu igwe.
3) High mkpuchi ihe arụmọrụ, dielectric constant3-3.2, mmebi voltaji 20-50KV / MM.
4) Ezi corrosion eguzogide, mmanụ eguzogide na waterproof (nwere ike na-asa)
5) Ike dị elu, dị nro ma na-agbanwe agbanwe, enwere ike ịkpụ ya ngwa ngwa
4. Ngwa:
(1) Enwere ike iji dị ka ihe mkpuchi ọkụ eletrik.
(2) Onye na-akwụ ụgwọ na-abụghị ọla, enwere ike iji ya dị ka njikọ maka tubing na enwere ike iji ya mee ihe n'ọtụtụ ebe na mpaghara mmanụ ala, injinịa kemịkalụ, ciment na ike ike.
(3) Enwere ike iji ya dị ka ihe mgbochi corrosion, nkwakọ ngwaahịa na ihe ndị ọzọ.
1. Ajụjụ: Kedu maka ụgwọ nlele?
A: Nlele na-adịbeghị anya: n'efu, mana a ga-anakọta ibu ibu ahaziri ahazi: chọrọ ụgwọ nlele, mana anyị ga-akwụghachi ma ọ bụrụ na anyị edozi iwu gọọmentị ma emechaa.
2. Ajụjụ: Kedu maka oge nlele?
A: N'ihi na ẹdude samples, ọ na-ewe 1-2 ụbọchị. N'ihi na ahaziri samples, ọ na-ewe 3-5 ụbọchị.
3. Ajụjụ: Ogologo oge ole ka mmepụta ihe na-eduga?
A: Ọ na-ewe 3-10 ụbọchị maka MOQ.
4. Ajụjụ: Ego ole bụ ụgwọ ibu ibu?
A: Ọ dabere na usoro qty yana ụzọ mbupu! Ụzọ mbupu dịịrị gị, anyị nwere ike inye aka gosipụta ọnụ ahịa sitere n'akụkụ anyị maka ntụaka gịMa ị nwere ike họrọ ụzọ dị ọnụ ala maka mbupu!
